PV003 Pellet Stove Auger Gear Motor 1-RPM

Features:

• Versatile, Standard Industry Mounting
• Heavy Duty Zinc die-cast Housing
• Common Industry Output Speed and Torque
• Standard 3/8” Diameter Output Shaft with 1” Extension
• High Temperature Spherical Bushings on Motor
• Robust Output Flange Bearings in Gearcase
• Heavy Duty Geartrain Design
• Nylon High Speed Gear for Smooth Operation

Description:

Cross Reference: Fasco V08038AA09, National Steel Crafters 6807, Lennox Hearth 6216
Replaces: Fasco V003, Multi Products PV003, and Rotom HM-RGM451
RPM = 1, VOLTS = 120, AMPS = 0.51, CONNECTION = Spade Terminals
CW Rotation when facing the shaft. 2-3/8" x 2-3/8" bolt hole pattern, 3-3/8" bolt circle

Rotation is reversible.
Hold auger motor in your hand with motor side facing you.
Remove 2 silver screws holding the bearing cap.
Remove bearing cap.
Remove the silver bolt(s) holding the black magnet in place. (There may be one or two depending on production)
Remove black magnet, flip it over, and place back onto motor. (Do not flip the shaft, only the black magnet)
Reinstall silver bolt(s) on magnet.
Reinstall bearing cap. Reinstall last two silver screws.