HM-RGM451 Pellet Stove Auger Gear Motor 1-RPM by Rotom

Features:

• Spade terminals
• Includes 6 mounting bolts
• 1.5 watts out
• 115 Volt
• Single speed
• Sleeve bearing
• Shaded pole
• CCW Rotation (CW facing the shaft)

Description:

Cross Reference: Whitfield 451U1-063, Fasco V08038AA09, National Steel Crafters 6807, Lennox Hearth 6216
Replaces: Fasco V003, Multi Products PV003, and Rotom HM-RGM451
RPM = 1, VOLTS = 115, AMPS = 0.19, CONNECTION = Spade Terminals
CW Rotation when facing the shaft. 2-3/8" x 2-3/8" bolt hole pattern, 3-3/8" bolt circle

Rotation is reversible.
Hold auger motor in your hand with motor side facing you.
Remove 2 silver screws holding the bearing cap.
Remove bearing cap.
Remove the silver bolt(s) holding the black magnet in place. (There may be one or two depending on production)
Remove black magnet, flip it over, and place back onto motor. (Do not flip the shaft, only the black magnet)
Reinstall silver bolt(s) on magnet.
Reinstall bearing cap. Reinstall last two silver screws.